Products
Product Series
Contact Us
Address: Building 1, 5th Floor, West Area, Wanfeng Science and Technology Park, No. 1 Shungeng Road, Hutan Town, Binhu District, Wuxi City, Jiangsu Province
Contact: Tang Bugao
Phone: 13915334699
Email: 116291789@qq.com
NCH-50 Horizontal Machining Center
Category:
Keywords: NCH-50 Horizontal Machining Center
Product Description
Basic Parameters
| Name | Unit | Parameter | |
| Processing range | Three-axis travel (X/Y/Z) | mm | 700/600/580 |
| Distance from the spindle centerline to the worktable surface | mm | 90~690 | |
| Distance from the spindle end face to the centerline of the worktable | mm | 120~700 | |
| Workbench | Workbench dimensions | mm | 500x500 |
| Maximum load capacity | kilogram | 400 | |
| Minimum graduation angle | mm | 1° × 360 | |
| T-slot (number of slots × slot width × spacing) | mm | 5x18x80 | |
| Spindle | Spindle speed | RPM | 8000 |
| Spindle taper bore | BT40-150 | ||
| Spindle motor power | kW | 11/15 | |
| Other | Lead screw (X/Y/Z) | mm | X/Z: Φ40-16, Y: Φ40-12 |
| Optomechanical weight | kilogram | 4000 | |
Standard machine tool configuration
| Serial number | Name | Quantity | Note |
| 1 | Base, column, spindle box, lower slide, worktable, slide carriage | 6 | Material HT300 |
| 2 | Three-axis motor mount, bearing housing | 6 | |
| 3 | Screw support bearing | 6 | 30TAC62 |
| 4 | X/Z: Φ40-16, Y: Φ40-12 | 3 | |
| 5 | X:35 roller guide rail Y/Z:45 roller guide rail | 3 | |
| 6 | BT40-150-8000 Spindle Unit (including belt and pulley) | 1 | |
| 7 | X/Y/Z Three-Axis Telescopic Shield | 1 set | Includes auxiliary guide rails, etc. |
| 8 | Shim, locking screw, nut | 1 set | |
| 9 | Three-axis drive-related flanges, spacers, and buffer pads | 1 set | |
| 10 | Sliding knife cylinder, spindle box bracket | 1 set | |
| 11 | Three-axis oil circuit | 1 set | |
| 12 | 500x500 single-degree indexing turntable | 1 set | 1x360° |
| 13 | Three-axis servo coupling | 1 set | |
| 14 | X/Y/Z axis cable carrier | 1 set |
Previous page
Next page
Previous page
NCH-100 Horizontal Machining Center
Next page
Related products
Product Message
Quick navigation
Address: Building 1, 5th Floor, West Area, Wanfeng Science and Technology Park, No. 1 Shungeng Road, Hutan Town, Binhu District, Wuxi City, Jiangsu Province
Contact: Tang Bugao
Phone: 13915334699
Email: 116291789@qq.com
